-
ZirkonZahn 6mm Shank Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1 with 6mm Shank. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. 0.6 A, 1.5A are special for milling zirconia implant...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
ZirkonZahn M1 CAD/CAM Tools for Milling Titanium, CoCr with Ball-end and Flat-end
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1 with 6mm Shank. The tools are special for milling metal materials like titanium, CoCr Disc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5R 6 50 6 1R 10 50 6 2R 12 50 6 3R...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
ZirkonZahn M1 CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the ZirkonZahn M1 CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.25 8.6 50 6 2.5 16 50 6 Have...- US$25.00
- US$25.00
- US$37.50
- Prezzo unitario
- per
-
ZirkonZahn M1 Milling Burs 6mm Shank Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 20 50 6 1.0 20 50 6 2.0 17...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
ZirkonZahn 6mm Shank CADCAM Tools Single Flute for Milling PMMA, PEEK
Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 20 50 6 1.0 14 50 6 2.0 18...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$28.00
- US$28.00
- US$40.00
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica
Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
- US$18.00
- US$18.00
- US$31.25
- Prezzo unitario
- per
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
- Scegliendo una selezione si ottiene un aggiornamento completo della pagina.