-
Roland CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 1.0...- US$28.00
- US$28.00
- US$40.00
- Prezzo unitario
- per
-
Roland CAD/CAM Carbide Tools Flat-End for Milling Zirconia, PMMA, PEEK, etc.
Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6(Flat-End) 10 50...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
Roland Wet 4W/42W CAD/CAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Roland Wet CAD/CAM system like 4W, 42W with 3mm Shank Diameter The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 9 40 3 1.0 6...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Roland DWX-42W Milling Bur Special for Machining Titanium Disc
Feature 100% compatible with Roland DWX-42W CAD/CAM. The tools are special for milling dental titanium disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 5 34 3 2.0 8 34 3 3.0 10 34 3 Have Questions? Contact Us- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Roland CAD/CAM Milling Burs Special for PMMA, PEEK to Avoid Sticking
Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 6 50 4 1.0 16 50 4...- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
-
Roland CAD/CAM Milling Bur with DLC Coat for Zirconia Block
Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 17 50 4 0.6 8 50 4 0.8 10 50...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
Flat-end Roland CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Roland CAD/CAM system like DWX50, DWX51D, DWX52, etc. DLC Coat with flat-end special for milling zirconia implant Size Details H(mm) L1(mm) L(mm) D(mm) 0.6F 10 50 4 1F 20 50 4 1.5F 20 50 4 2F 20 50 4 Have...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per