-
VHF CAD/CAM Milling Bur 35mm Length with DLC Coat for Zirconia Block
Feature 100% compatible with VHF CAD/CAM system like K4, N4 with 35mm total length. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 35 3 0.6 7 35 3 1.0 16...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
VHF 5axis Carbide Single Flute Tools for Milling PMMA, PEEK
Feature 100% compatible with the VHF 5axis CAD/CAM system like K5, S1, S2, R5, etc with 40mm total length. The single fulte tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 40 3 2.0...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
VHF 5axis CAD/CAM Metal Tools 35mm Length for Milling Titanium, CoCr
Feature 100% compatible with the VHF CAD/CAM system like R5, S1, S2, S5. The tools are special for milling metal materials like titanium, CoCr Disc. 0.6mm, 1.0mm, 2.0mm is ball nose milling bur. 1.2F is flat-end for milling implant abutment. Size Details H(mm) L1(mm) L(mm)...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
VHF CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the VHF Wet Mill CAD/CAM like R5, Z4, N4, S1, S2, S5, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 35 3 1.0...- US$20.00
- US$20.00
- US$31.25
- Prezzo unitario
- per
-
VHF CAD/CAM Tools 40mm Length with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with VHF CAD/CAM system like R5, K5, S1, S2, S5, etc. with 40mm total length. Diamond coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 7 40 3...- US$28.00
- US$28.00
- US$40.00
- Prezzo unitario
- per
-
VHF 5axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal
Feature 100% compatible with the VHF 5axis CAD/CAM system like K5, S1, S2, R5, etc with 40mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm)...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
VHF 4axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal
Feature 100% compatible with the VHF 4axis CAD/CAM system like K4, N4, etc with 35mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm)...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
VHF 4axis Carbide Single Flute Tools for Milling PMMA, PEEK
Feature 100% compatible with VHF CAD/CAM system like Z4, N4, N4+, K4 edition, etc. with 35mm total length. The single fulte tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 35 3 2.0 16...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
VHF 4axis CAD/CAM Tools 32mm Length for Milling Titanium, CoCr
Feature 100% compatible with the VHF 4axis CAD/CAM system like Z4, N4, etc. The tools are special for milling metal materials like titanium, CoCr Disc. 0.6mm, 1.0mm, 2.0mm is ball nose milling bur. 1.2F is flat-end for milling implant abutment. Size Details H(mm) L1(mm)...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
VHF CAD/CAM Milling Bur 40mm Length with DLC Coat for Zirconia Block
Feature 100% compatible with VHF CAD/CAM system like R5, K5, S1, S2, S5, etc with 40mm total length. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 40 3 0.6 7...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
VHF CAD/CAM Tools 35mm Length with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with VHF CAD/CAM system like Z4, N4, N4+, K4 edition, etc. with 35mm total length. Diamond coat is special for milling zirconia disc with good performance to mill about 500units crowns. The tools can't be used for K4 due to the...- US$28.00
- US$28.00
- US$40.00
- Prezzo unitario
- per
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$28.00
- US$28.00
- US$40.00
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica
Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
- US$18.00
- US$18.00
- US$31.25
- Prezzo unitario
- per
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
- Scegliendo una selezione si ottiene un aggiornamento completo della pagina.