-
Imes-Icore 6mm Shank Carbide Tools for Milling Zirconia, Wax, PMMA, Soft Metal T33, T15, T32, T12/T14, T11/T13, T17, etc.
Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3(Conical) 20 50 6 0.6(Conical)...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
Imes-Icore 3mm Shank Carbide Tools for Milling Zirconia, Wax, PMMA, Soft Metal T33, T15, T32, T12/T14, T11/T13
Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc with 3mm shank. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm)...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
T21 T22 T23 Imes-Icore 6mm Shank CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13.5 40 6 1.0 13 40 6 2.5 15.5...- US$25.00
- US$25.00
- US$37.50
- Prezzo unitario
- per
-
T21 T22 T23 Imes-Icore 3mm Shank Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics
Feature 100% compatible with the Imes-Icore CAD/CAM system like 250i, etc with 3mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 43 3 1.0 13 43 3...- US$20.00
- US$20.00
- US$31.25
- Prezzo unitario
- per
-
Imes-Icore CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr
Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 50 6 1.5 10 50 6 2.0 12 50 6 3.0 12 50...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Imes-Icore Milling Burs 6mm Shank Special for PMMA, PEEK to Avoid Sticking
Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 53 6 1.0 14 53 6 2.5...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Imes-Icore Milling Burs 3mm Shank Special for PMMA, PEEK to Avoid Sticking
Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.0 14 48...- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
-
Flat-End Imes-Icore CAD/CAM 6mm Shank Tools for Milling Titanium,COCR
Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc. with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 4 50 6 1.5 7 50 6 2.0 14 50 6 3.0 7...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Imes-Icore CAD/CAM Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 53 6 1.0 14 53 6 2.5 20 53...- US$30.00
- US$30.00
- US$43.75
- Prezzo unitario
- per
-
Imes-Icore CAD/CAM Tools 3mm Shank with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.0 14 48 3...- US$28.00
- US$28.00
- US$40.00
- Prezzo unitario
- per
-
Imes-Icore CAD/CAM 6mm Shank Drilling Tools for Machining Titanium, COCR
Feature 100% compatible with the Imes-Icore CAD/CAM system like 350i, 650i, etc with 6mm shank diameter. The tools are special for metal implant structures. Size Details H(mm) L1(mm) L(mm) D(mm) 1.5 14 50 6 2.5 7 50 6 Have Questions? Contact Us- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Imes-Icore CAD/CAM Tools 3mm Shank for Milling Titanium, CoCr T1/T6 T2/T7 T4/T9
Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc with 3mm shank. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 9 47 3 2.0 12 47 3 3.0...- US$25.00
- US$25.00
- US$31.25
- Prezzo unitario
- per
-
Imes-Icore 3mm Shank Tools Flat-end for Milling Zirconia Implant Abutment
Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, COREITEC one, etc with 3mm shank. Flat-end is special for milling zirconia implant abutment. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.5 16 48 3 Have Questions? Contact Us- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
-
Imes-Icore CAD/CAM Milling Bur 3mm Shank with DLC Coat for Zirconia Block
Feature 100% compatible with Imes-Icore CAD/CAM system like 250i with 3mm Shank DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 48 3 1.0 14 48 3 2.5 20 48 3...- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
-
Imes-Icore 6mm Shank Single Flute Carbide Tools for Milling PMMA, PEEK T11/T13, T12/T14
Feature 100% compatible with Imes-Icore CAD/CAM system like 350i, 650i, etc. The single flute tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 14 53 6 2.0 20 53 6 Have Questions? Contact Us- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
-
Imes-Icore 3mm Shank Tools Single Flute T11, T12 for Milling PMMA, PEEK, Wax
Feature 100% compatible with the Imes-Icore CAD/CAM system like 140i, 250i, 450i, COREITEC one, etc with 3mm shank. The single blade tools can be used for milling PMMA, PEEK, wax discs with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0(Single Blade) 14 48...- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
Featured Products
Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$28.00
- US$28.00
- US$40.00
- Prezzo unitario
- per
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
- US$22.00
- US$22.00
- US$27.50
- Prezzo unitario
- per
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
- US$20.00
- US$20.00
- US$25.00
- Prezzo unitario
- per
Fresa Amann Girrbach CAD/CAM per disilicato di litio, vetroceramica
Caratteristica 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. Gli utensili sono prodotti con grana diamantata per la lavorazione di vetroceramica, disilicato di litio, Hybrid Ceramic, ecc. Dettagli sulle taglie H(mm) L1(mm) L(mm) D(mm) 0.4 14 43...
- US$18.00
- US$18.00
- US$31.25
- Prezzo unitario
- per
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant
Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
- US$18.00
- US$18.00
- US$22.50
- Prezzo unitario
- per
- Scegliendo una selezione si ottiene un aggiornamento completo della pagina.