Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Многоцелевой фрезы Amann Girrbach для фрезерования циркония, воска, PMMA и т. Д.

Многоцелевой фрезы Amann Girrbach для фрезерования циркония, воска, PMMA и т. Д.

Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro и т. Д. Эти mногоцелевой инструменты можно использовать для фрезерования большинства стоматологических материалов, таких как циркония, воск, PMMA, PEEK, мягкий металл и т. Д. С хорошей производительностью. Детали размера H(мм) L1(мм)...
US$20.00
US$20.00
US$25.00
Фрезы Amann Girrbach для Emax, дисиликат лития

Фрезы Amann Girrbach для Emax, дисиликат лития

Feature 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro ic и т. Д. Инструменты производятся с алмазным зерном для обработки стеклокерамики, дисиликата лития, гибридной керамики и др. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14 43...
US$18.00
US$18.00
US$22.50
Фрезы Amann Girrbach с алмазным покрытием, специально для циркония

Фрезы Amann Girrbach с алмазным покрытием, специально для циркония

Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion 2, Mikro и т. Д. Алмазное покрытие специально предназначено для фрезерования циркониевых дисков с хорошими характеристиками для фрезерования коронок на 500 единиц. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0...
US$24.00
US$24.00
US$30.00
Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM NEW Diamond BLG Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 10...
US$18.00
US$18.00
US$22.50
Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Amann Girrbach CADCAM Milling Tools Special for Metal like Titanium, Co-Cr,etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are special for milling metal material like titanium, Co-Cr,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 43 3 2.0 12 43 3 Have Questions? Contact Us
US$18.00
US$18.00
US$22.50
Фрезы Amann Girrbach специально для PMMA, PEEK, чтобы избежать липкости

Фрезы Amann Girrbach специально для PMMA, PEEK, чтобы избежать липкости

Характеристика 100% совместимость с фрезерными станками Amann Girrbach, такими как Motion2, Mikro и т. Д. Инструменты специально предназначены для фрезерования полимерных материалов, таких как PMMA, PEEK, с хорошими характеристиками, чтобы избежать липкости. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16...
US$22.00
US$22.00
US$27.50
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Рекомендуется
  • Наиболее актуальные
  • Лидер продаж
  • От А до Я
  • От Я до А
  • По возрастанию цены
  • По убыванию цены
  • Сначала старые
  • Сначала новые
Сортировка

Сортировка:

  • Рекомендуется
  • Наиболее актуальные
  • Лидер продаж
  • От А до Я
  • От Я до А
  • По возрастанию цены
  • По убыванию цены
  • Сначала старые
  • Сначала новые
  • 3010227HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    3010227HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Super Fine-For fine finishing of gold, alloys and all versions of resins & composites – due to the special cut also ideally suited for ceramics avoiding occurrence of crackles. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength....
    US$10.00
    US$10.00
    US$10.00
  • 3008201HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    3008201HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Super Fine-For fine finishing of gold, alloys and all versions of resins & composites – due to the special cut also ideally suited for ceramics avoiding occurrence of crackles. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength....
    US$10.00
    US$10.00
    US$10.00
  • 3004198HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    3004198HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Super Fine-For fine finishing of gold, alloys and all versions of resins & composites – due to the special cut also ideally suited for ceramics avoiding occurrence of crackles. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength....
    US$10.00
    US$10.00
    US$10.00
  • 3002145HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    3002145HP-Cross Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Cross Cut Super Fine-For fine finishing of gold, alloys and all versions of resins & composites – due to the special cut also ideally suited for ceramics avoiding occurrence of crackles. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength....
    US$7.50
    US$7.50
    US$10.00
  • Diamond Grinder Compatible with YRC-8PRO CAD/CAM for Lithium Disilicate, Composite

    Diamond Grinder Compatible with YRC-8PRO CAD/CAM for Lithium Disilicate, Composite

    Feature 100% compatible with the YUCERA CAD/CAM like YRC-8PRO with 6mm shank diameter. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 6 1.0 10 50 6 2.5...
    US$20.00
    US$20.00
    US$25.00
  • Metal Milling Cutters Compatible with YUCERA YRC-8PRO for Titanium, CoCr

    Metal Milling Cutters Compatible with YUCERA YRC-8PRO for Titanium, CoCr

    Feature 100% compatible with YUCERA CAD/CAM system like YRC-8PRO, YRC-8S with 6mm shank. The tools with AlTiN coat are special for milling metal like titanium, Co-Cr, etc. Size Details H(mm) Type L1(mm) L(mm) D(mm) T1-3.0 Ball 12.5 50 6 T2-2.0 Ball 12.5 50 6...
    US$22.00
    US$22.00
    US$27.50
  • Milling Burs Compatible with PrograMill Dry for PMMA, Wax

    Milling Burs Compatible with PrograMill Dry for PMMA, Wax

    Feature 100% compatible with Ivoclar PrograMill Dry system with 3mm shank diameter. The tools are special for milling PMMA, PEEK, Wax with one flute design. Replacement for original tools 0.7C(748047), 1.0C(748048), 2.5C(748049), 1.5F(748050), 0.7(748044), 1.0(748045), 2.5(748046) Size Details H(mm) L1(mm) L(mm) D(mm) 0.7 08...
    US$20.00
    US$20.00
    US$25.00
  • Milling Burs Compaitble with PrograMill Dry CADCAM for Zirconia Block

    Milling Burs Compaitble with PrograMill Dry CADCAM for Zirconia Block

    Feature 100% compatible with the Ivoclar PrograMill Dry (PM Dry) CAD/CAM system. Zirconia tools are available in 2.5c(748040), 1.0c(748039), 2.5(748043), 1.0(748042), 0.7(748041), 0.3(748037) Size Details H(mm) L1(mm) L(mm) D(mm) 2.5c 20 40 3 1.0c 16 40 3 2.5 20 40 3 1.0 16 40...
    От US$18.00
    От US$18.00
    US$22.50
  • YUCERA YRC-6X CADCAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramic, Composite

    YUCERA YRC-6X CADCAM Diamond Grinder for Milling Lithium Disilicate, Glass Ceramic, Composite

    Feature 100% compatible with the YUCERA YRC-6X CAD/CAM system  with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 50 4 1.0 10 50 4 2.5 16...
    US$20.00
    US$20.00
  • Dentium Rainbow CAD/CAM 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Block

    Dentium Rainbow CAD/CAM 3mm Shank Tools with Diamond Coat Special for Milling Zirconia Block

    Feature 100% compatible with the Dentium Rainbow-mill CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 8 43 3 1.0 16 50 3 2.0 16 50 3...
    US$24.00
    US$24.00
    US$30.00
  • XTCERA Xmill 300 CADCAM Diamond Grinder Tools 4mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.

    XTCERA Xmill 300 CADCAM Diamond Grinder Tools 4mm Shank for Milling Lithium Disilicate, Glass Ceramics, Composite,etc.

    Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill D5, etc. with 4mm shank. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 45 4 1.0...
    US$20.00
    US$20.00
    US$25.00
  • XTCERA Xmill 300 Xmill 500 Milling Cutters 4mm Shank with Diamond Coat Special for Zirconia

    XTCERA Xmill 300 Xmill 500 Milling Cutters 4mm Shank with Diamond Coat Special for Zirconia

    Feature 100% compatible with the XTCERA CAD/CAM system like X-Mill 300, X-Mill 500, X-Mill 580, etc. with 4mm shank diameter. Diamond Coat is special for milling zirconia disc with good performance to mill about 500 units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6...
    US$22.00
    US$22.00
    US$30.00
  • DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking

    DEPRAG CADCAM 4mm Shank Tools Special for Milling PMMA, PEEK, Wax, to Avoid Sticking

    Feature 100% compatible with the DEPRAG CAD/CAM system like D52, W52, etc with 4mm Shank. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 20...
    US$20.00
    US$20.00
    US$25.00
  • Aidite CADCAM Tools 6mm Shank with AlTiN Coat Special for Milling Titanium, Cobalt Chrome Disc

    Aidite CADCAM Tools 6mm Shank with AlTiN Coat Special for Milling Titanium, Cobalt Chrome Disc

    Feature 100% compatible with the Aidite AMW-400, AMW-400S, etc with 6mm shank diameter. The tools with AlTiN coat is special to mill metal disc like titanium, Cobalt Chrome,etc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 10 50 6 1.5 10 50 6 3.0 15...
    US$24.00
    US$24.00
    US$30.00
  • ZirkonZahn 6mm Shank CADCAM Tools Single Flute for Milling PMMA, PEEK

    ZirkonZahn 6mm Shank CADCAM Tools Single Flute for Milling PMMA, PEEK

    Feature 100% compatible with the ZirkonZahn CAD/CAM system like M1, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 20 50 6 1.0 14 50 6 2.0 18...
    US$25.00
    US$25.00
    US$31.25
  • Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Zotion C5 CADCAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the Zotion C5M CAD/CAM system. Diamond Coat is special for milling Zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 50 4 1.0 16 50 4 2.0 16 50 4 1.5(Flat)...
    US$24.00
    US$24.00
    US$30.00
  • Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Zotion C5M Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the Zotion C5M CAD/CAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 10 45 4 1.0 10 45 4 2.5 16 45 4 Have...
    US$20.00
    US$20.00
    US$25.00
  • Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$20.00
    US$20.00
    US$25.00
  • Фрезы Wieland Zenotec Select для Emax, дисиликат лития

    Фрезы Wieland Zenotec Select для Emax, дисиликат лития

    Характеристика 100% совместимость с фрезерными станками Wieland Zenotec Select. Инструменты производятся с алмазным зерном для обработки стеклокерамики, дисиликата лития, гибридной керамики и др. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.5 10 40 3 1.0 9 40 3 2.0 19 40 3 3.0 21 40...
    US$20.00
    US$20.00
    US$31.25
  • Фрезы ZirkonZahn с диаметром хвостовика 3мм и алмазным покрытием специально для циркония

    Фрезы ZirkonZahn с диаметром хвостовика 3мм и алмазным покрытием специально для циркония

    Характеристика 100% совместимость с фрезерными станками ZirkonZahn, такими как M5 и т. Д. с диаметром хвостовика 3mm. Алмазное покрытие специально предназначено для фрезерования циркониевых дисков с хорошими характеристиками для фрезерования коронок на 500 единиц. Детали размера H(mm) L1(mm) L(mm) D(mm) 0.5 6 57 3...
    US$24.00
    US$24.00
    US$30.00