Sidebar

Categories

Featured Products

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
US$18.00
US$18.00
US$22.50
Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Amann Girrbach CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro, etc. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$28.00
US$28.00
US$40.00
Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Amann Girrbach CAD/CAM Milling Burs Special for PMMA, PEEK, to Avoid Sticking

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The tools are special for milling resin materials like PMMA, PEEK with good performance to avoid sticky. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 13 47 3 1.0 16 47 3...
US$22.00
US$22.00
US$27.50
Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Amann Girrbach Multipurpose Tools for Milling Zirconia, Wax, PMMA, etc.

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47...
US$20.00
US$20.00
US$25.00
Amann Girrbach CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Amann Girrbach CAD/CAM Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion 2, Mikro ic, Matick, etc. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.4 14 43 3 1.0 14...
US$18.00
US$18.00
US$31.25
Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Flat-end Amann Girrbach CAD/CAM Tools Special for Milling Zirconia Implant

Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro .etc. DLC Coat with flat-end special for milling zirconia implant. 0.6mm has 2 blades and 1.2mm has 4 blades. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 16 47 3 1.2 20 47 3...
US$18.00
US$18.00
US$22.50
Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • 6002201HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    6002201HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Super Fine-Smooth cutting pattern on all alloys and composites,reduces rework - especially suitable on prosthetic appliances for papilla shaping. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • 6001145HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    6001145HP-Plain Cut Super Fine Dental Laboratory Tungsten Carbide Cutter 2.35mm Shank

    Plain Cut Super Fine-Smooth cutting pattern on all alloys and composites,reduces rework - especially suitable on prosthetic appliances for papilla shaping. Feature Material Quality: Made from high-grade tungsten carbide for superior durability and strength. Precision Engineering: Precision-ground for high accuracy and optimal performance. Variety...
    US$7.50
    US$7.50
    US$10.00
  • VHF 4axis Carbide Single Flute Tools for Milling PMMA, PEEK

    VHF 4axis Carbide Single Flute Tools for Milling PMMA, PEEK

    Feature 100% compatible with VHF CAD/CAM system like Z4, N4, N4+, K4 edition, etc. with 35mm total length. The single fulte tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 35 3 2.0 16...
    US$20.00
    US$20.00
    US$25.00
  • VHF 5axis Carbide Single Flute Tools for Milling PMMA, PEEK

    VHF 5axis Carbide Single Flute Tools for Milling PMMA, PEEK

    Feature 100% compatible with the VHF 5axis CAD/CAM system like K5, S1, S2, R5, etc with 40mm total length. The single fulte tools can be used for milling PMMA, PEEK with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 16 40 3 2.0...
    US$20.00
    US$20.00
    US$25.00
  • DOF CRAFT 5X CAD/CAM Carbide Tools for Milling Zirconia, Wax, PMMA, PEEK, Soft Metal, etc.

    DOF CRAFT 5X CAD/CAM Carbide Tools for Milling Zirconia, Wax, PMMA, PEEK, Soft Metal, etc.

    Feature 100% compatible with the DOF CRAFT 5X CAD/CAM system. The carbide tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16...
    US$18.00
    US$18.00
    US$25.00
  • DOF CRAFT 5X CAD/CAM Tools Special for Milling Metal like Titanium, CoCr, etc.

    DOF CRAFT 5X CAD/CAM Tools Special for Milling Metal like Titanium, CoCr, etc.

    Feature 100% compatible with the DOF CRAFT 5X CADCAM system. The tools are special for metal like titanium, Cocr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 1.0 8 40 4 2.0 12 40 4 Have Questions? Contact Us
    US$20.00
    US$20.00
    US$25.00
  • DOF CRAFT 5X CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    DOF CRAFT 5X CAD/CAM Tools with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with the DOF CRAFT 5X CADCAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 40 4 1.0 16 40 4 2.0 16 40 4...
    US$28.00
    US$28.00
    US$40.00
  • DOF CRAFT 5X Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    DOF CRAFT 5X Diamond Grinder Tools for Milling Lithium Disilicate, Glass Ceramics

    Feature 100% compatible with the DOF CRAFT 5X CADCAM system. The tools are produced with diamond grit for machining glass ceramics, lithium disilicate, Hybrid Ceramic, etc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 8 32 4 1.0 9 32 4 2.5 14 36 4...
    US$18.00
    US$18.00
    US$25.00
  • PrograMill PM7 CAD/CAM Milling Burs Special for PMMA, PEEK, Wax

    PrograMill PM7 CAD/CAM Milling Burs Special for PMMA, PEEK, Wax

    Feature 100% compatible with the PrograMill PM7 CAD/CAM. The tools are special for milling plastic materials like PMMA, PEEK, Wax. H(mm) L1(mm) L(mm) D(mm) 0.5 8 49 6 1.0 10 52 6 f1.5 15 49 6 2.5 25 59 6 5.0 35 59 6...
    US$22.00
    US$22.00
    US$27.50
  • Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

    Amann Girrbach CADCAM Tools with DLC Coat for Machining Zirconia Disc

    Feature 100% compatible with the Amann Girrbach CAD/CAM system like Motion2, Mikro, etc. DLC Coat can mill about 150 units. (depend on the hardness of zirconia block). Size Details H(mm) L1(mm) L(mm) D(mm) 0.3 16 47 3 0.6 13 47 3 1.0 16 47...
    US$18.00
    US$18.00
    US$22.50
  • PrograMill PM7 Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc

    PrograMill PM7 Tools 6mm Shank with Diamond Coat Special for Milling Zirconia Disc

    Feature 100% compatible with PrograMill PM7 CAD/CAM system. Diamond Coat is special for milling zirconia disc with good performance to mill about 500units crowns. Size Details H(mm) L1(mm) L(mm) D(mm) 0.5 5 52 6 1.0 14 53 6 2.5 20 53 6 Have Questions? Contact...
    US$30.00
    US$30.00
    US$43.75
  • PrograMill PM7 CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr

    PrograMill PM7 CAD/CAM Tools 6mm Shank for Milling Titanium, CoCr

    Feature 100% compatible with the PrograMill PM7 CAD/CAM system. The tools are special for milling metal materials like titanium, CoCr disc. Size Details H(mm) L1(mm) L(mm) D(mm) 0.6 5 40 6 1.0 8 45 6 1.5 12 45 6 2.0 12 45 6 3.0...
    US$25.00
    US$25.00
    US$31.25
  • Dental Lithium Disilicate Blocks (Glass Ceramics) C14 HT/LT (5 Pieces)

    Dental Lithium Disilicate Blocks (Glass Ceramics) C14 HT/LT (5 Pieces)

    Feature High translucency up to 62%, matching the esthetics of natural teeth Thanks the simple and fast process, patients can experience a same day restoration without the need of a second appointment Have Questions? Contact Us
    US$40.00
    US$40.00
    US$50.00
  • VHF 5axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    VHF 5axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    Feature 100% compatible with the VHF 5axis CAD/CAM system like K5, S1, S2, R5, etc with 40mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm)...
    US$18.00
    US$18.00
    US$22.50
  • VHF 4axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    VHF 4axis Carbide Tools Flat-End for Milling Zirconia, Wax, PMMA, Soft Metal

    Feature 100% compatible with the VHF 4axis CAD/CAM system like K4, N4, etc with 35mm total length. The multipurpose tools can be used for milling most dental materials like Zirconia, wax, PMMA, PEEK, soft metal, etc. with good performance. Size Details H(mm) L1(mm) L(mm)...
    US$18.00
    US$18.00
    US$22.50
  • Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Shofu Vintage MP Porcelain for Metal 5g-Paste Opaque

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$20.00
    US$20.00
    US$25.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Opal Porcelain and Insical

    Shofu Vintage Halo Porcelain for Metal 50g-Opal Porcelain and Insical

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$28.00
    US$28.00
    US$35.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Opaque Dentin

    Shofu Vintage Halo Porcelain for Metal 50g-Opaque Dentin

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$48.00
    US$48.00
    US$60.00
  • Shofu Vintage Halo Porcelain for Metal 50g-Opaque Powder

    Shofu Vintage Halo Porcelain for Metal 50g-Opaque Powder

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$35.00
    US$35.00
    US$43.75
  • Shofu Vintage Halo Porcelain for Metal 50g-Body

    Shofu Vintage Halo Porcelain for Metal 50g-Body

    Vintage Halo is a user friendly, feldspar-based porcelain that has minimal shrinkage and allows the dental technician to chose between a two, three or more powder build-up technique. The even distribution of leucite in the glass matrix makes it very kind to the wear...
    US$28.00
    US$28.00
    US$35.00